EcoMaster MK3
"ECOFLOW" LLC offers to your attention unique equipment, the use of which will allow you to solve tasks at your enterprise that were previously considered difficult or impossible at all
The EcoMaster MK 3 installation with a 250M pump and a Volvo Penta diesel engine develops a maximum working pressure of up to 3000 bar and a maximum performance of up to 32 l/min of water. The installation is completely autonomous and mobile, mounted on the basis of a car trailer. For connection, the Customer requires tap water and a 220 v, 1.7 kW connection point for the pumping pump of the water preparation unit. Installations of the EcoMaster MK 3 series are an ideal solution for hydromechanical cleaning of variouбs surfaces, cleaning of the inner walls of heat exchanger tubes, cleaning of various equipment from deposits, rust or old coatings. With the help of various nozzles, these installations are widely used in the chemical, oil and gas industry, and shipbuilding. The basis of the installation is a pump of the construction series M, with a working pressure of up to 3000 bar. The drive is carried out by a diesel engine. The installation is equipped with built-in fuel tanks, preliminary storage tanks for water. The WOMATIC control and management system of the latest generation provides monitoring of all the main functions of the installation, provides control and protection for all parameters that can affect work. The safety of the operator is ensured by pressure relief systems when the work is stopped.
Approximate scope of application of the EcoMaster MK3 installation:
Construction:
Removal of road markings, drawings, graffiti from roads, runways; concrete repair - sanitation, dissection, destruction; cleaning formwork elements, equipment from concrete; removal of corrosion and cleaning ofwelded joints; cleaning from paint and protective coatings; cleaning of construction machinery from persistent contamination.
Mining industry:
Cleaning of equipment, pipes, concrete and metal surfaces.
Automobile and wagon building:
Cleaning of elements of painting shops - discharges, painting chambers.
Shipbuilding and ship repair:
Cleaning / stripping of the hull from paint and varnish coatings and corrosion; internal cleaning of tanks, vessels, heat exchangers and pipes; washing of vessels.
Food industry:
Cleaning of equipment, heat exchangers and pipelines.
Building materials industry:
Cleaning of furnaces, autoclaves, trolleys; cleaning of welded joints; cleaning of equipment.
Pulp and paper industry:
Cleaning of paper machine parts (paper machines) - filters and gauge roll; cleaning of tanks and pipelines.
Ferrous metallurgy:
Descaling in the production process; cleaning of casting molds; general cleaning of workshop equipment, etc.
Non-ferrous metallurgy:
Cleaning of heat exchangers; cleaning from corrosion; cleaning.
Oil and gas industry:
Cleaning of heat exchangers; cleaning of drilling and tubing pipes, machine parts; cleaning and surface preparation; cleaning of storage equipment; hydroabrasive cutting is explosion- and fire-proof.
Chemical and petrochemical industry:
Pipeline cleaning; cleaning of autoclaves, reactors; cleaning grating and mesh filters; cleaning of welded joints; cleaning of heat exchangers; cleaning containers and vessels.
Housing and communal services:
Removal of road markings, drawings, graffiti from roads, runways; cleaning of pipes, channels, sewers, heat networks; cleaning equipment for inspection, revision.
Electricity (TPP, SDPS,Npp,boiler houses):
Pipeline cleaning; cleaning of heat exchangers, boilers, cooling towers, splash pools.
Repair/installation: removal of hermal insulation, coatings, corrosion, cleaning of joints; cleaning of storage equipment, vessels.
The installation is managed by specially trained and qualified personnel who have sufficient work experience to solve any tasks.
WOMA 55YP16 Dynajet 800
Installation for cleaning with water under high pressure Dynajet 800TN
Mobile, autonomous high-pressure cleaner with water up to + 95°C, possibly with an abrasive, high capacity with low consumption of hot water. Made in Germany! The WOMA 55 YP 16 Dynajet800th is the world's first 800 bar hot water high pressure cleaner. Equipped with a powerful industrial Volkswagen diesel engine. It is mounted on a single-axle trailer, which allows easy operation in the most difficult-to-reach places. The installation is also absolutely mobile and autonomous, including hot water preparation. Two 66 kW heaters allow you to get water with the required working temperature in a matter of minutes. To connect from the Customer, tap water and a 220v, 1.7kW connection point for the water block pumping pump are required. The high operational characteristics of the equipment allow our specialists to perform the tasks set by you with a high degree of labor productivity and quality.
Approximate scope of application of the 55YP16 Dynajet 800:
In the communal sector:
For cleaning sidewalks from chewing gum, dirt, cleaning pipes, washing graffiti, removing old paint from all surfaces.
In the construction industry:
For rehabilitation of reinforced concrete structures, cleaning of construction equipment, concrete pipes, formwork, etc. Surfaces treated with a jet of hot water heat up and dry faster after cleaning. This allows you to start further processing or use of cleaned objects faster.
In the road construction industry:
For cleaning: equipment, bridge structures, removal of old markings, etc.
In livestock farming:
For cleaning and disinfection: cowsheds, pig farms, turkey farms, chicken farms. Cleaning of farm machinery.
In shipbuilding:
For cleaning new, repairing and restoring used ships.
In mechanical engineering:
For cleaning finished products. In most cases, it is enough to simply treat them with hot water to dissolve oil and grease, tar, etc., pollution. This allows you to abandon the use of cleaning agents or reduce their consumption to a minimum, which means that you can save money and reduce the burden on the environment.
In the metallurgical and chemical industry:
For cleaning heat exchangers. For this, the sink is equipped with special additional equipment, which is included in the kit.
In the food industry:
Improved cleaning results. Hot water liquefies frozen fats and oils, improves their emulsification and, as a result, significantly improves cleaning results. The use of hot water in the food industry guarantees effective removal of fat and protein contaminants.
Improved hygienic indicators:
After cleaning with hot water, significantly fewer viable microorganisms remain on the surfaces. Treatment with a jet of hot water without the use of disinfectants is quite sufficient to meet the requirements of sanitation at many enterprises.
Cleaning a thickener at a mining complex
We would like to bring to your attention our services of qualified cleaning and preparation of industrial facilities for the best performance of the production process. Let's take as an example the facility where the following works were carried out: the first stage was cleaning the surface of the polyurethane membrane with ultra-high pressure unit, then differentiation and restoration of damaged walls with the application of soil, then applying a layer of polyurea. The final stage is UV protective coating application
