Wall-cutting machine HUSQVARNA WS 482 HF
Husqvarna WS 482 HF One of the most powerful wall-cutting machines for cutting high-strength concrete, bricks and other building materials. The water-cooled electric motor produces spindle power of 19 kW (25 hp) at 32 A current or 9 kW (12 hp) at 16 A current, although the wall cutter weighs only 28 kg. The two-speed gearbox provides operation in a wide range of revolutions and allows the use of discs with a diameter of up to 1600 mm. Spindle speed is infinitely adjustable via remote control to optimize tool performance for any application. The direction of rotation of the disc can also be changed using the remote control to ensure the desired direction of dust and dirt removal.
Radial connection - the carver has a radial connection of the cutting disc, which makes it easy to replace the disc, especially when cutting close to the wall.
Modular system - SKO machines
Disc rotation - the ability to choose the direction of rotation of the cutting disc and supply water in the desired direction makes our machines unique in their kind. The operator can also adjust the speed and power of the machine based on the diameter of the cutting disc, the type of disc and the material being cut.
The modular design is easy to transport and install.
WS 482 HF is a very powerful wall-cutting machine for cutting reinforced concrete, bricks and other construction materials up to 730 mm thick. This wall cutting machine can be used to cut all kinds of openings, including cutting stairwells, including at various angles and close to the wall. The symmetrical design of the rail allows cutting from both sides, as well as cutting close to the floor and the adjacent wall.
Our wall cutting machine WS 482 HF is equipped with the CS 10 system, which has turned it into the perfect rope machine. The universal rope wall cutting system CS10 allows you to perform most cutting jobs. In combination with the HUSQVARNA WS 482 wall-cutting machine, we got two machines in one.
The system is suitable for working with any openings with almost no limit on the depth of cutting, including cutting stairs, cutting at an angle and flush. The rope saw CS 10 can be used for dry cutting, and the high-speed rope C 900 is used for work in extreme conditions - for dry cutting of iron.
The unique design of the mounting brackets makes it possible to cut stairs.
The unique design of the mounting brackets enables cutting at an angle.
The installation is managed by specially trained and qualified personnel who have sufficient work experience to solve any tasks.
Diamond drilling rig Husqvarna DM400 + DS500
The DM 400 is a powerful and robust drilling machine designed for medium to heavy duty drilling where high reliability and productivity are required. The range of recommended diameters in combination with the DS 500 bed is 55-350 mm. The aluminum motor housing withstands tough operating conditions, and the carrying handle is ergonomic and provides additional protection for the drill. Built-in functions to connect to the Husqvarna Fleet ServicesTM system to analyze operational data and machine status. Suitable for drilling drains, ventilation ducts, drilling at an angle and raw drilling of several holes in a row, as well as cutting close to corners.
Husqvarna DS 500 is a new medium-sized drill stand for a wide range of professional core drilling operations, delivered to Ukraine since December 2019. It combines high stability and strength and is characterized by low weight. Quick connection functions and low weight simplify work and increase its efficiency. The compact carriage with an optimized gear ratio works perfectly with Husqvarna DM 400 single-phase drilling machines and similar high-powered models.
It is recommended for crowns with a diameter of up to 400 mm. The steel-reinforced extruded aluminum column construction is improved for high drilling accuracy and efficiency. All hinges are designed with zero backlash for long-term reliability. A steel-reinforced cast magnesium base plate provides rigid mounting and reduces overall weight. A quick-release coupling for the drill press and easy adjustment of the angle of the back support make it easy to set up and drill at an angle. If necessary, the carriage can be easily removed from the column. The customer requires a voltage of 220-240 V, the possibility of connecting water.
Gasoline cutter Husqvarna K 970 Ring
Gasoline cutter Husqvarna K970 ring. It is designed to create the deepest possible cutting line on concrete, stone, brick, asphalt surfaces, building blocks and other materials of high hardness. The device has the feature of creating a cut with twice as high hardness. The device has the feature of creating a cut twice as deep as compared to other gasoline carvers. The manual ring cutter is powered by a 4800 W (6.5 hp) engine with an air cooling system and X-Torq technology. Such an engine device produces up to 75% less harmful emissions and has 20% lower fuel consumption. The presence of Active Air Filtration™ and DuraStarter™ protection of the starter against dust penetration is aimed at the longest and most productive period of operation without replacing filters and maintaining the device.
Field of application
Gasoline cutter K970 is designed for cutting strong and solid structures - concrete and reinforced concrete floors, door and window openings, stone and brickwork, granite and marble slabs. Separately, we note its use for metal. It has found application in various areas:
-Construction and repair of buildings and structures. It is used for dismantling works, cutting window and door openings, inter-floor ceilings;
-Road works – for cutting asphalt, concrete and curbs;
-Laying of communications. Allows you to make trenches and channels for further laying of pipes, electricity and Internet wires, arranging the system.
Hydraulic rope machineHUSQVARNA CS 2512
HUSQVARNA CS 2512 Hydraulic rope machine, power 20 kW, cutting depth unlimited, maximum torque on the drive pulley 200 N/m, rope movement speed 20/25 m/s, pressure 230 bar, oil consumption 65 l/min, rope magazine capacity 12 m, weight 150 kg. For connection, water and a 380 V connection point are required from the Customer.
Specifics:
HUSQVARNA CS 2512 rope cutting machine - can perform very labor-intensive work, being, at the same time, compact and mobile enough to perform small jobs. It has various areas of application, both in the floor version and with installation on the wall.
The Husqvarna CS 2512 in combination with the PP 4554 E hydraulic station is a powerful and easy-to-use rope cutting machine.
The chain saw Husqvarna CS 2512 is a high-quality professional construction tool capable of quickly and efficiently performing work even in the most difficult conditions, where other saws would be powerless. The principle of operation of this saw is that the cutting is performed thanks to the diamond rope, which, hitting the walls, concrete columns or other materials, makes a smooth and high-quality cut. The guide rollers automatically follow the direction of the rope thanks to the rotary mechanism on ball bearings. Cutting can be done both vertically and horizontally. A large shop for diamond rope will allow cutting even large walls or other products.
Diamond wire cutting is the easiest and most efficient way to work with large concrete structures such as foundations and bridges, as well as cutting openings in thick walls. Wire rope machines are easy to operate.
They are powerful and versatile enough to handle smaller jobs more efficiently than many other cutting tools.
